Ram - Cold Air Intake System     Mopar Performance Parts is pleased to introduce our new cold air induction kits. Designed to force cold outside air through a directional cone filter and funnel, these kits significantly improve horsepower and torque under varying atmospheric conditions. Kits include all mounting hardware and washable/reusable filter. Features & Benefits Fits the 2002-2003 Dodge Ram Trucks equipped with the 3.7, 4.7, 5.7, 5.9, 8.0 L engine. Estimated 8 – 10 horsepower increase Outperforms every comparable intake system on the market Provides a deeper and throatier intake sound Utilizes a custom hardware kit with soft mounts for a perfect fit High polish silver powder coat finish with Mopar logo One-piece, four-layer, Blue cotton-gauze air filter features an integral velocity stack that provides superior filtration and air flow. Black powder-coated steel heat shield Comprehensive installation instructions included Looking for the Blue Cleaner and Blue Oil? We Have it right here! Don't forget to pick up the cleaning & Re-oil kit!   Notice: SRT-10 includes Cold Air and Ram Air Induction system!
The Standard Ram with Hemi you must order both Cold Air and Ram Air Induction Kit!  
Mopar's SRT10 Ram Air Induction system creates a ram air effect at speeds of 40 + mph. It intergrates seamlessly to the underside of the SRT10 Ram Air Hood to route cool outside air into the included Performance Cold Air Intake System. The Ram Air Induction System is constructed from lightweight material and installs directly with minor modifications.
Note: yours may look different that the item shown  

If a quarter panel needs replacement, it's a good bet the Outer Wheelhouse does, too. These steel reproduction units install easily requiring only minor welding, and add a finishing touch to any restoration. Sold individually.

Ram Leveling Kits and 2” Lift Kits for Ram 4WD Pickups.
Fits all cab and bed configurations, including Duallies (except TRX4 models). Leveling kits raise the front of the Ram, and eliminate the factory “nose low” rake, to make room for tires 1” to 2” taller than stock. For 2500 / 3500 models, a 2” rear block kit is offered for those who need to retain the factory rake because of load hauling and towing. FEATURES:
• Front lift, depending on application, is via either coil spacers, strut spacers or new torsion bar keys, so factory springs are retained and ride quality is unaffected.
• Very economical.
• Can use factory wheels and allows clearance for tires 1” to 2” taller than stock.
• Easy installation - Most kits install in no more than a couple of hours. Front end realignment is required.
• Ram 2500 / 3500 rear block kit (#P5155452) includes two U-bolt sets to applicate both axle types found in these pickups, plus brackets to prevent suspension over-compression. NOTE: Vehicle RPM and speedometer readings are based on the stock vehicle’s tire and wheel combinations. Installing larger wheels and tires with your Mopar Performance lift kit could result in incorrect RPM, speedometer and odometer readings. Limited Lifetime Warranty: P5155387AB, P5155388AB, P5155391AB, P5155394, P5155452 These products are covered by a Limited Lifetime Warranty. In summary, the warranty covers all Mopar® suspension components included in these part numbers (no labor or freight), except those subject to normal wear, for as long as the original retail purchaser owns the vehicle the parts were originally installed on. The warrantor is the system manufacturer, not Mopar®, Chrysler Group LLC, or the dealership selling the product. For Warranty details call the Mopar Tech Line at 888.528.HEMI.     NOTE (1): Includes Mopar Performance front shock absorbers.
NOTE (2): For 1500 Mega Cab, use 2500 / 3500 kit.

The most commonly used metals in the manufacture of exhaust systems are rusty mild steel, aluminized steel or an inferior 409-grade of stainless. Mopar uses only Aircraft Quality T-304 Stainless Steel. It costs more than the other lesser grades of steel. To cut, bend and hand weld T-304 grade Stainless Steel takes special equipment too. Ask your local muffler shop if they can make a smooth, precision mandrel bend in a 2.50" 304 Stainless Steel pipe for you. You won't find many that can, and it won't be cheap. We also focus heavily on research and development to assure that the system fits performs and sounds better than any other system on the market. The Mopar Cat-Back systems have a deeper, throatier tone than stock. Our engineers take care in designing and tuning the systems with the mellow sound of power, aggressive yet elegant. Picture yourself driving down the road and turning up the bass on your stereo system but not changing the volume. That's what it sounds like! Yes, many of our customers enjoy installing their Mopar Cat-Back system. In fact, we are told all the time that it's a tougher job to remove the stock system than to install their Mopar Cat-Back! Just be sure you have good clearance and access under your vehicle, have the proper tools, observe standard safety procedures, and ensure the vehicle is secured by approved jack stands. CAT-BACK SYSTEM (Complete Exhaust System from Catalytic Converter Back with Dual chrome exhaust tips, 4.25" x 3.5" Oval tips, 2.25" Diameter Tubing.) No modifications are required -- these kits simply bolt into the OE hangers and brackets. The dual outlet tips are a full 4-inch outside diameter of highly polished stainless steel, giving a no-nonsense appearance from the rear of the vehicle.., Only Shipped Ups Note: Due to size of the shipping container ups bills this item at 70lbs PERFORMANCE WARRANTY INFORMATION